Home | Factory Tour | Technical Support
INQUIRY NOW | About Us | FAQ | Contact Us
Tel: +86-760-85329382
sales@mhbadge.com   Skype Chatting
  
Product Categories
Location: Home > Technical Support
Photo Etched Bronze Soft Enamel
published date: 2014/9/11

Same principle as pictures taken by camera, photo etched soft enamel is manufactured by taking an image of your design and transferring it from film onto the surface of a sheet of metal. Your design is then etched into the bronze or stainless or aluminum using an acid etching process. Then all of the acids and other impurities are carefully cleaned from the surface. The indentations created by the acid etching process are then filled with the enamel colors. Each color is applied by hand, one at a time, using different sized syringes. The sheet of metal is then fired at 160 degrees centigrade for 15 minutes. The lapel pins are then cut from the metal sheet according to your custom design. Non-colored (raised) sections of the pins are then plated and brushed to a shiny finish. An optional epoxy protective coating (dome) can then be applied to protect the color enamels from being scratched or damaged.

Compared to pins of cloisonne and die struck soft enamel, the advantage to photo etched pins are that process is less expensive and lighter in weight. But, still have a high-perceived value. Have you seen or collected baseball-trading pins before? This type of product is the best choice for oversized or Jumbo pins since thickness of metal sheet is 0.8mm.

Photo-etched process also offers you great detail, flexibility in design and a wide selection of colors. This allows your imagination to run creatively for an elaborate lapel pin design. Two things to consider about when you design your pins, this process is not suited for designs that require multiple levels or need sharp external shape because its border usually has 0.8mm - 1mm wide.

Copyright © Ming Hong Badge Factory All Rights Reserved.